Toy Dirtbike Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A center stand for toy dirtbikes.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 471
- Wydruki
- 1
- Wyświetlenia
- 1441
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Can be printed either upside down or right side up.
In either orientation, I recommend using organic supports everywhere and either a 0.15mm or 0.20mm layer height.
I added two different heights, 26mm and 20mm, to hopefully accommodate more scales. I didn't change the size of the platform or base of the model, just the heights. If there is a specific size you would like, I should be able to adjust the parameters of the file and upload it.
The legs of this model are thin. Roughly 2.75mm thick. This is mostly meant to display toy motorcycles and will likely break under play use. Just a heads up for those of you that might print this for a child to play with.