H2 V2S Revo Ender 5 Plus Blow Through Mount V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the H2 Blow Through Mount for the Ender 5 Plus by JLCURTIS.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Version 1 of this model moved the air vents down 3mm. When I test printed it, I thought that the vents were too low so in version 2 of this model I have moved the air vents back up by half a millimeter.
I printed this with supports only where the support was on the print bed. If you allow internal supports to print, you will never be able to remove them. The fan mounts in JLCURTIS's original design should work with this remix, but I haven't tried them. I have included the Fusion360 file and a .3mf for people who may want to further remix this.
JLCURTIS recommended 2 m3 x 8mm screws to attach the H2 to the mount. In my experience, the m3 x 10mm is a better fit.