Bambu A1 Mini Silicon Nozzle Wipe for Voron 2.4 Bedpan by Ramalama2 for Mandalaroseworks Kinematic Bed

I use the excellent designed bedpan by ramalama2 for my Voron24 with mandalaroseworks kinematic bed. Ramalama redesigned the original Bedpan by Midnite3DP to include a few extras and work with the extra height of the madalaroseworks bed. I saw a neat modification of the original bedpan that uses the Bambulab A1 Mini silicon Nozzle wipe. I decided to create a pressure fit piece that allows the Bambulab A1 Mini silicon nozzle wipe to work with the ramalama2 bedpan.

There are two versions of the insert.

Flush version makes the nozzle wipe sit flush just as the original brass brush used to. Please note that the silicon nozzle is about 2mm higher

Overhang version has the nozzle wipe overhang the bed plate by about 2mm. This is mainly for me because I use tapchanger with the shuttle helper and also have titanium backers so I needed a bit more room.

I would recommend using ABS or ASA as this sits very close to the bed.

I used typical Voron print settings.
Printed in Polymaker ASA

This is pressure fit and my tolerances were pretty tight on purpose.

BOM:

1x - Heatbed Nozzle Wiper for A1 Mini - Comes with 2 (I didnt realize this and now have 4)
https://us.store.bambulab.com/products/heatbed-nozzle-wiper-a1-mini

ABS or ASA Filament

Config:
I used the macro from the Voron Decontaminator Purge Bucket (There are others though)
https://github.com/VoronDesign/VoronUsers/blob/master/orphaned_mods/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_%26_Nozzle_Scrubber/Macros/nozzle_scrub.cfg

I would recommend to have it wipe 10-15mm to each side of the silicon wipe to help get rid of any danglers.

Attribution:

Ramalama2 Bedpan for Voron 2.4 - There are also buckets for non Mandala Roseworks beds
https://github.com/Ramalama2/Voron-2-Mods/tree/main/Mandalaroseworks/BedPan

Original Bedpan for Voron 2.4
https://github.com/Midnite3DP/voron-bedpan

Reasons I Needed Overhang and they are pretty interesting IMO:

Tapchanger (if interested… in my mind something will be standard in the future as it makes servicing heads super easy and my head is more stable than with aluminum tap)
https://github.com/viesturz/tapchanger

Stealthchanger (Becoming the new standard for Tapchanger)
https://github.com/Hellsparks/StealthChanger