Extreme Bull Commander Mini Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement parts for CNC handles on the Commander Mini.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 664
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement CNC handles for the Commander Mini are $100 each, this is a much cheaper alternative. These are made to be the same size as stock handles, and stock screws can be reused. Front handle have built in bumper/kickstands.
STEP files are included for remixing purpose.
Pros:
- 320 gram (~0.7 lbs) lighter than CNC handles when printed in TPU.
- Practically indestructible when printed in TPU.
- Can be cheaply replaced.
- Easier on your hands when lifting/carrying the wheel around.
Cons
- Top handle will tilt forward when pushed: you can make it move less by using 4 screws on each side (8 screws total) instead of 2 like stock handle. This issue is due to poor design on Extreme Bull's end, having the default screw holes at the end of the handle instead of middle.
- When printed in TPU, the front/rear handles will flex when lifted upward, as long as all screws are installed, it should not break, just that it won't feel as stable.
Filament: Stiff TPU (Cheap 95A TPU or 40D will work, the harder the better), PETG & PLA can be used but not recommended since you want the handles to have flexibility.
Nozzle: 0.6mm; Layer height: 0.3mm
Wall/Perimeter: 4
Infill: Gyroid 15-20%
Minimal support needed (Recommend to have support for the front/rear handle screw holes).