Parametric Box and Lid, Nail Clipper Box and Lid Example
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a basic box with a lid that slides in a dovetail slot. You can customize the size and add internal to suit
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I use this box as a template and edit it as needed to add internal spacers, text on the top, etc.
Here are the parameters:
I think most are self-explanatory. The "Clearance" parameter creates a small where the lid slides into the box. 0.25 mm works pretty well for my printer.
Note that all of the “Divider…” parameters are not in use in the “Parametric Box v1” model. They are just placeholders. When I am designing dividers for these boxes, it is just easier to work with parameters so you can adjust things in the sketches in one spot. You can see them in the “Clipper and Scissor Box Example” model. Also note that the “Divider…” parameters in the example model are not robust, more of a quick and dirty to get a specific model from the template.
I generally print these with the bottom layer set to 0. It seems to keep everything from curling up without needing brims or an enclosure over my printer.