Metabo KGS 216 M Replacement Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Direct replacement feet for Metabo KGS 216 M mitre saw
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 67
- Wydruki
- 1
- Wyświetlenia
- 430
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
TL;DR
- Press-fit so you won't lose them (again), use (plastic) hammer with care
- Used filament: PLA(+)
- Infill: 30% gyroid
- Layer height: 0.2mm
- Notice: Will probably cause scratches on worksurfaces if you use hard filament. Use at your own risk.
---
Needed to replace one of the feet on my Metabo KGS 216 M mitre saw. Could not find a model for it on Printables so I rolled my own. Replace all feet at once if you want to make sure that your saw is equally crooked/warped as before changing them.
These are meant to be press-fit directly into the holes where the original feet came from. I had to use a plastic hammer (furniture hammer) to get them in all the way. This is intentional, as I do not want to experience another surprise wobbly cut in the (near) future.
I used PLA+ for mine with a 30% gyroid infill on 0.2mm layer height (Prusa Mini \w input shaper on Speed Profile). I do not have other materials to work with and I needed a solution that worked on my benchtop so I did not mind printing it with something as hard as PLA. Be mindfull that replacing the rubber feet with something like PLA or PETG might not be a great idea as this can cause scratches on your worksurface. You've been warned.
TPU might be a better material choice but I do not have that kind of filament nor the equipment to print with it. If you do and you are in need of these feet, let the rest of the internet know in the “Makes & Comments” section of this model if they worked for you. Thanks in advance.