Wiring Stack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is just a basic cable management stack I threw together to hide various wires coming from the top of my Anycubic…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is just a basic cable management stack I threw together to hide various wires coming from the top of my Anycubic Kobra Plus. Myself, I have a USB power wire and the filament sensor wire coming from the very top of my printer. I also have a Wyze camera that also has its USB power cord too. I'm not a fan of wires hanging off of things or going any which way. This stack also me to tuck all of them away with a little bit of room left over.
I've included 3 extensions of various sizes. For my Kobra Plus, I used three (3) 100mm extensions beyond the base & cap which makes it roughly the same height as the z-axis gantry. At each connection point and at the top, there are openings that allow for 1 or 2 USB cords to fit through. The cords exit the base heading under the printer.
The stack base is designed to tightly slide into the v-slots into the right side of the frame of my printer towards the back. It should fit other printers using the same type of 2040 or 4040 aluminum extrusion. I've included a couple of pictures showing how the stack appears to blend into the back of the printer.
As always, please post a remix or comment to let me know if my design has been of use to you. If you like the design but the base won't fit your printer and you are unable to create your own base, please message me and maybe we can work together to create one.
Print Settings
Printer Brand:
Anycubic
Printer:
Kobra
Rafts:
No
Supports:
Yes
Resolution:
.20mm is sufficient, .15mm if you want a smoother surface
Infill:
20% is more than sufficient
Filament: Anycubic PLA Black
Notes:
With the exception of the base, all the other components can be printed without supports if printed in their current orientation. The base will only need supports for the v-slot mounts. I would recommend using brims because of the height of some of the parts.
Category: 3D Printer Accessories