Fishing Rod Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This rod mount is designed around my Shimano Zellous Rods.
- Ocena
- 5 / 5
- Polubienia
- 115
- Pobrania
- 564
- Wydruki
- 1
- Wyświetlenia
- 3856
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — NoDerivatives
This rod mount is designed around my Shimano Zellous Rods. The hooks measure 18mm towards the butt and 10 mm towards the middle of the rod. this is designed to use drywall screws and ankers that are 4 to 5 mm in diameter and a countersunk head.I will be adding different-sized hooks shortly.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
50
Filament: ZYLTech PLA gunmetal
If you want any modifications to the part or have something else you want made reach out to me via my fiverr profile https://www.fiverr.com/ethandavis149
Find my other available models here
Thigiverse
https://www.thingiverse.com/ethan_davis/designs
Cults3d
https://cults3d.com/en/users/EthanDavis/3d-models
Printables
https://www.printables.com/@EthanDavis_1726313
Category: Sport & Outdoors