barrel spacer for airsoft m4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was designed in Fusion 360 and is designed to go on the outside lip of an airsoft barrel
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 341
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was designed in Fusion 360 and is designed to go on the outside lip of an airsoft barrel and press on the inside lip of the hand guard to adjust tension and handguard position.
This was designed specifically for this handguard:
https://www.thingiverse.com/thing:2253858
Since it does not have a collar and grub screws independent of the main body it was rotating too far and not providing the proper tension. So I modeled these to act like shims and fix the problem. .f3d and .obj files are provided to adjust for size and tolerances for your specific gun.
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
Doesn't Matter
Supports:
No
Resolution:
200
Infill:
100
Filament: PolyMaker Pla or Petg
Notes:
print with .2mm layer height for best dimensional precision on the hight and 3-4 wall lines
If you want any modifications to the part or have something else you want made reach out to me via my fiverr profile https://www.fiverr.com/ethandavis149
Find my other available models here
Thigiverse
https://www.thingiverse.com/ethan_davis/designs
Cults3d
https://cults3d.com/en/users/EthanDavis/3d-models
Printables
https://www.printables.com/@EthanDavis_1726313
Category: Hobby