PIXO Pixel Minimalist Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minimalist case for the PIXO Pixel, a 16x16 EPS32 Based RGB Display that uses the APA102-2020 LED.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 436
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A minimalist case for the PIXO Pixel, a 16x16 EPS32 Based RGB Display that uses the APA102-2020 LED.
There is only a port for power - buttons and USB programming are covered up with this case, but it could be easily modified to make them more accessible.
Print instructions
Licence: Creative Commons - Attribution Category: Electronics Print Settings
Printer Brand: FlashForge
Printer: Creator Pro
Resolution: .4mm
Infill: 25%
Notes:
Printed in black PETG - should be possible in many materials.
Post-Printing
Assembly Instructions
1) Remove all hardware that came with the PIXO Pixel
2) Screw 4x M3x6 standoffs into the base of the "Case" part and secure with an M3 nut
3) Place bottom board of PIXO Pixel into case, and secure with 4x M3x15 standoffs
4) Place upper board of PIXO Pixel on standoffs
5) Place "Bezel" part on top of upper board
6) Secure with M3 screws of appropriate length (I used M3x12 button head screws)
Plug in power and enjoy!
How I Designed This
Designed in Fusion360 - am happy to share the files/project upon request!