1 / 1
K1 Max Capricorn Tubing Cutting Jig — zdjęcie 1

K1 Max Capricorn Tubing Cutting Jig

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple cutting jig to trim capricorn tubing to the proper size for K1 Max's extruder.

Ocena
0 / 5
Polubienia
22
Pobrania
79
Wydruki
1
Wyświetlenia
536
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Introduction

If you need to replace the small piece of PTFE tubing between the extruder and hotend on a K1 max, this small jig will trimming the tubing to the exact size. The slot in the jig fits a common utility knife/box cutter blade. Make sure to get a new one for the sharpest cut.

Warning

Note that this has been tested only on my K1 Max, which means that the sizing is somewhat biased towards my machine. In case you print and the result tubing doesn't fit, I ask that you add a comment so we can improve the model and have it become useful for more users.

 

Tagi