Compact 2/3 Axis GoPro / SJCAM Gimbal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an attempt to design as compact as possible 3 axis brushless gimbal for SJCAM and gopro cameras.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an attempt to design as compact as possible 3 axis brushless gimbal for SJCAM and gopro cameras.
Gimbal is designed with RCTimer GBM2804 motors in mind and targets (with the current frame mount) a flamewheel like frame with 37mm spacing between top and bottom plates.
To keep the gimbal as compact as possible the rev around Z axis is quite limited but it should be enough to smooth out yaw movements.
I did a test print and setup - with SJ4000 there's a problem with balance (should be ok now - need to reprint) on the roll axis with the current version. Untill the pitch arm is updated you'll need to either apply a small counterweight on the camera side.
Other than that - works great :) (see it here: https://www.youtube.com/watch?v=gHf7ikSdP_4 , https://www.youtube.com/watch?v=tePknWLL-Ks)
Yaw is approx +-20 deg.
If you want a 2 axis skipping yaw/roll arm should do the trick :)
TODO:
- improve balance
- work on the frame mounting options
- think more about cable management
- a new version for GoPro session or SJ M10 - even more compact?