Doorknob Backset Measuring Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this to quickly measure the thickness and backset cut of any normal door.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Are you tired of measuring doors with a tape measure? Don't want to buy an expensive door-hanger's gauge tool? Then I have just the thing. Remixed from rb's left-handed ruler, this tool is designed to quickly and accurately check door thickness and the backset for your door knob.
PLA+ Recommended
Print in either orientation, it may need greater tolerance on the dovetail if printed flat to account for the droop in the joint. The one I printed flat didn't snap when bent to failure, the dovetail simply came loose. Printed vertically, no post-processing was needed and the joint is even stronger.