1 / 6
Philips Hue Dimmer Insert for Feller EDIZIOdue cover — zdjęcie 1
1 / 6

Philips Hue Dimmer Insert for Feller EDIZIOdue cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An insert for a Philips Hue Dimmer (Version 2) into the Feller EDIZIOdue cover line.

Ocena
0 / 5
Polubienia
4
Pobrania
71
Wydruki
0
Wyświetlenia
751
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

A holder for the Philips Hue dimmer into a Feller EDIZIOdue cover. The holder is split in two pieces, being the same dimension as the original Feller switches.

For an assembly you need:

  • Feller EDIZIOdue cover piece with two empty places (in the example a 3x1 piece)
  • two pieces of the feller ediziodue insert
  • the top and bottom part of the hue holder
  • a strong 3x5mm magnet

Each hue holder piece is glued to the insert piece - separate pieces because I wanted to add a black "shade" in the small gap between the holder and the insert piece.

The top and bottom pieces get glued to the Feller cover with some hotglue magic, as is the small magnet (check the orientation before glueing). This makes the attachment of the hue pieces reversable.

For the Feller cover to attach snug to the wall, I added some double sided tape on the backside of the top hue piece.

Tagi