Rivian R1S Trunk Riser 62mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are used to create a level flat floor for the Rivian R1S Trunk. This version is at 62mm Height
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 917
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
The R1S has a two position for the load floor to allow for the floor to be stepless but this causes the area behind the 3rd row to be ramped at a significant enough level that I would worry about strapping down stuff on that end and bending it.
I designed and had a friend 3D print some floor risers that make the floor basically flat.
62mm is the original height pictured, 57mm is the updated height to ease the angle into the folded 3rd row.
Buy me a coffee
https://paypal.me/kelvn831?country.x=US&locale.x=en_US