1 / 12
Voron CNC X Carriage (Beacon/Omron Rev) - Omron Probe Support Bracket/Cover — zdjęcie 1
1 / 12

Voron CNC X Carriage (Beacon/Omron Rev) - Omron Probe Support Bracket/Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Omron Induction Prove Support Bracket/Cover

Ocena
0 / 5
Polubienia
5
Pobrania
40
Wydruki
0
Wyświetlenia
973
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Converting a lot of my printer to metal parts because metal is, well metal…. So while this carriage is designed around beacon probe it also has mounting points for omron induction probe, klicky mount, etc… Link below for the carriage off AliExpress. 

I didn't like the look of the exposed omron, so made a few designs to shield view. 

Low profile is really just a support bracket that supports nothing lol

Mid profile (alt 1) is more of a sock but leaves the printing on the label visible if you forget what color wire is S,G, or V.

Full height (alt 2) covers the whole probe but leaves a hole for the status light.

All (3) models require (2) M3x5 or (2) M3x6 screws to secure via the beacon probe mounting holes.

Set your probe offset to X=0, Y=38 

https://www.aliexpress.us/item/3256806061188646.html?spm=a2g0o.order_list.order_list_main.5.24fc1802zjfJu2&gatewayAdapt=glo2usa

Tagi