1 / 7
Narex Wooden Screwdriver Set Mount - Wall or Skadis Peg Board — zdjęcie 1
1 / 7

Narex Wooden Screwdriver Set Mount - Wall or Skadis Peg Board

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D printed mount for wooden Narex 7-piece set, fits wall/Skadis board.

Ocena
0 / 5
Polubienia
18
Pobrania
80
Wydruki
0
Wyświetlenia
575
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

Narex Wooden Screwdriver Mount - Wall or Skadis Peg Board - 7 Piece 

This is my original design for the Narex 7-piece wooden screwdriver set, available here.

Wall Mount Details:

  • 4mm holes for 6G screws.
  • 9mm wide channel for screw bit.
  • Two versions. Standard and countersunk screws.
  • Screw centres 130mm apart
  • Screws appx 20mm set back into the mount.

 

Skadis Pegboard Mount Options:

  • Hook version and Skadis T-Nut system.
  • T-Nut version is slightly wider so it can be centred and still fit the varied screwdriver sizes.
  • T-nut design credit to @6d6178: link
  • Requires 2 T-nuts from the link.

 

Print Setup:

  • Recommended Material: PETG for added strength (especially for the hook version), although PLA will likely be fine.
  • Wall mount versions can be oriented with the rear of the mount on the print bed.
  • The T-nut version does not require supports. Orient these with the back of the mount at a 45-degree angle, face of the mount flat on the print bed.
  • Hook version: Print with the base of the mount on the print bed and with supports.
  • Layer Height: 0.2mm with 15% grid infill.

I designed this to fit specifically my set; leather gasket sizes in other sets may vary, I'm not sure.
I would appreciate feedback from anyone who prints.
Especially if you try it out on a different brand and it works :)

Thank you to all who choose to use and provide feedback on this design.
Your support and input is greatly appreciated.

Affiliate Link: Narex Wooden Handle Screwdriver Set 7-Pieces

Tagi