Adjustable tilt legs for sBITX V2/V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable tilt legs for sBITX V2/V3
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
sBITX tilt legs. This version features adjustable tilt angles by adjusting the leg angles. The new feature comes with the price of a larger mount that protrudes out beyond the heat sink.
Designed in OpenSCAD so it is easily modified.
The six pairs of stop screw holes can be used in two ways:
Screw through base hole and through leg hole.
+Securely fixes leg
+ Maximum tilt with screw in top hole
- Must take screw out to fold leg
Screw through base hole and used as leg stop
+Leg folds and unfolds until it hits the stop
-Leg can fold if manhandled
You will need 4 M3x16 screws for the hinges and 3 M4x12 screws to attach to the back of the sBITX case.
Just fits the width of a Prusa Research MK3s print bed.
I printed this in PETG using three perimeters and 25% gyroid fill. I printed the legs edge down to have a nice, clean screw hole without supports. The back was printed without supports on a Prusa Research MK3s :)