1 / 4
Anna & Elsa Castle stairs for Disney hasbro toy
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
the daughter's wish is my command.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 1167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
This massive stairs was printed on my Anycubic Chiron with 0.6mm Nozzle, 2 Walls and 8% Infill, without any supports but 30mm brim! Filament Use was about 400g. On the highest point it is 416mm high. To print the right side of the stairs, easy mirror the model in the slicer. Double sided tape will hold it.
Filament left stairs: Spectrum PETG Ice Blue
right stairs: Filamentum PETG translucent neon pink
