Bezier Curve Boomerang
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little exercise to practice the modeling techniques as in the video below. This boomerang is not all that different…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
A little exercise to practice the modeling techniques as in the video below. This boomerang is not all that different from my previous designs, but since it worked quite nicely right off the bat, I decided to publish it.
It has a surprisingly long range for a boomerang that is not hook- or omega-shaped, i.e., does not have a large inscribed circle. Throw not too high and with a bit of layover.
Print Settings
Rafts:
No
Supports:
No
25%
Notes:
Use 4-6 perimeters and top and bottom layers, respectively. Fewer than that and it might be too light and possibly not stiff enough. Make sure it lies flat when coming off the build plate; boomerangs like to warp downwards after printing. If so, that must be corrected by bending and possibly applying a little heat.
Made in Blender 2.9.x. The outline started out as a Bezier circle. Unfortunately in Blender you'll have to convert it to a polygon mesh at some point, and then you lose the nice modeling workflow of the Bezier curves.
Category: Sport & Outdoors