Version 2. Escura Hasselback focusing screen spacer & viewfinder holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Version 2. Escura Hasselback focusing screen spacer & viewfinder holder.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 890
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Please have a look at the Vimeo video here.
The Escura Hasselback focusing screen spacer & viewfinder holder has a lower height and a tighter fit compared to version 1. Version 2 is a bit more delicate and should be handled with care.
The lower height allows you to use a waist level finder and still get fairly sharp picture of the screen. The chimney finder can be adjusted and I recommend it for critical work.
Also updated are the focusing screen spacers and I have added marks for the Instax mini on the spacers. There are three variants: 1) One without marks, 2) one with subtle Instax mini marks and 3) one that is entirely dedicated to Instax mini.
Please not the orientation of the slots:
Put the spacer in the camera and the focusing screen on top of it.
I recommend Loctite Super Glue Precision when it comes to glue the parts. All the parts I have printed are black PETG from Clas Ohlson.
You need to glue the two upper parts and you consider to glue them to the lower part for increased stability:
This part should facing the lens, it will slide over the focusing screen with a tight fit.
Do you like it? Please consider to buy me a cup cup of coffee.