Soldering scaffolding
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple scaffolding fixture for holding Soldering iron. Low cost Low print effort
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 348
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Additional points:
- Slider is designed for an additional screw that could lock its axial position on the frame
- The scaffolding is designed for having a rigid base so a equilateral tringle is used
- Meaning if you need to increase the height of the frame, you will need same length of rod for the base
- Additional rod could be added on the base for rigidity between the two extreme ends (250mm rod)
- All print models are in the same stl file
- For the frame feet you could add a anti skid sticker of 10mm diameter - feature provided
Tolerances:
- Designed with .1mm of clearance for the scaffolding
- Designed with .15mm of clearance for slider
Size:
- With the current BOM the size is 150x150x250
- In order to change the size all rod lengths could be varied
BOM:
Item Name Quantity
1 Slider 1
2 Slider cap 1
3 Hex socket head cap screw M4x0.70 x 12 1
4 Rod Dia 10x250 2
5 Frame end support Top 2
6 Hex socket head cap screw M4x0.70 x 25 2
7 Ruthex M4 Insert 3
8 Frame end support Lower 4
9 Rod Dia 10x150 6
Off the shelf parts:
- Item #3, 4, 6, 7, 9
Print parts:
- Item #1,2,5,8