Stackable Octagonal Drawers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made to look nice, more for an office than a workshop.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 146
- Wydruki
- 0
- Wyświetlenia
- 670
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I need stackable draweds for my home office corner. I couldn't find any to fit my desk, my printer and all my other preferencies. So I made one.
It is still a bit of a work in progress, as the box didn't come out as solid as I'd like. So I'm going to make some adjustments, mainly a thicker upper and bottom wall. And a smaller handle.
The box prints well on 0,3 layer, no supports.
For the drawer, you can print at 0,3 layer, but check that the wall has 3 perimeters. It might work better on 0,2 depending on your other settings.
The handle prints up side down, I used 0,2 layer and organic supports for it.