1 / 4
HSW hanger for small mallet — zdjęcie 1
1 / 4

HSW hanger for small mallet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holds small crafting mallets on honeycomb storage wall for easy access. Raised front edge prevents slip-off.

Ocena
0 / 5
Polubienia
9
Pobrania
63
Wydruki
0
Wyświetlenia
166
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

Designed to hold this small crafting mallet, which I use to tap together printed parts on large assemblies. Supports may be needed for the attachment on the back.

While I designed it for this specific mallet, I'm sure there are many tools that could easily hang from this holder.

The space between the arms is 14mm, and the arms are 25mm deep. The front edge is raised just a bit, to make sure the mallet can't easily get knocked off the hooks.

For my print, I used Overture PLA in red, using the default profile on my P1S. Not much infill is needed due to the light weight of the mallet. I used 15%, but you could possibly get away with less.

Tagi