1 / 1
LACK V2 Spool Cylinder (for MMU spool holder bearings)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simply the original cylinder, but modified to accept the 22x7 bearings from the stock MMU Spool rollers.
- Ocena
- 4,923 / 5
- Polubienia
- 67
- Pobrania
- 383
- Wydruki
- 13
- Wyświetlenia
- 2430
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 13) (Komentarze: 16)Remiksy (1)Kolekcje (115)Powiązane
Simply the original cylinder, but modified to accept the 22x7 bearings from the stock MMU Spool rollers.
Put Supports on Buildplate / Paint on support for the lower bearing space.
And keep the original print instructions in mind.