Japanese joinery - a wacky test piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two pieces connecting with a Japanese style joint edge but i went a little bit crazy
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 448
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It seems that i will not re-invent a thousand year old woodworking design. But i can go a little crazy with it. The result is still very good.
BE AWARE if you print it as is, tightening the screw will likely break the layer lines… It still works even if one part is in two halves. That Japanese joinery tech is amazing.
If you know how to solve the screw issue without changing print orientation, tell me.
- While adding diagonal lines improves printability, it does not do much for the join - it would slide diagonally if the wedge is not used. Not a big deal.
- I made the whole shape diagonal
- a wacky wild non-symmetrical shape
- i made the wedge itself a little skew so it bites better (that actually works)
- i also tried a very sharp version. It works too but is not as precise in the tips and is.. well sharp
Holes are 4mm, should fit a small sunken head wood screw
Originally i intended to use this as a connection for a rack to hang it on a wall.. and it can certainly do the job, but the design is really complex and difficult to adapt. Leaving it as a standalone piece might be better.