1 / 2
Tefal Ingenio glass lid handle main part replacement. — zdjęcie 1
1 / 2

Tefal Ingenio glass lid handle main part replacement.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement body of Tefal Ingenio glass lids handle - big, round plastic part that you screw to glass lid.

Ocena
5 / 5
Polubienia
7
Pobrania
171
Wydruki
1
Wyświetlenia
1077
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

As nice as Tefal Ingenio kitchenware is, after some time of usage glass lids handles breake around thread. Here is replacement for main body of glass lids handle - big, round plastic part that you screw to glass lid witch M5 stainless bolt and gasket/pad. Inner hole meant to be calibrated with 4.2 drill bit and threaded with M5 thread cutter.

Works well printed with HD PLA, and annealed to withstand higher temperatures. While printing, and annealing take into account dimensional shift (in my case around 2% shirnkage in X, a Y axes and 2% expansion in Z axis). I also recomend printing inner 18-20mm with 100% infill - as I have tested this place is prone to breaking with lower infill percentages.

Also I do not take any responsibility for any health concerns regerding usage of printed kitchenware parts.