1 / 4
Meshpro Anti-Spill Ring
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an anti-spill ring for the Freemax Mesh Pro atomizer with the bubble tank installed. Version 4 is 11.50mm…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an anti-spill ring for the Freemax Mesh Pro atomizer with the bubble tank installed.
Version 4 is 11.50mm radius and fits very well.
Version 5 is 11.25mm radius and is for those that like a snugger fit.
You do not have to remove the ring to fill the tank. By moving the split in the ring to the dot on the tank then by pressing firmly on the tank top to slide it open the ring will spread and slip down out of the way.
Printing Suggestions:
- Print on a raft with the flat edge down. (look closely)
- Use no infill
- 999 bottom layers
- 0 top layers
- 20 wall lines
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
No
Resolution:
200
Filament:
PolyMaker PLACategory: Other