Sunlu Masterspool Filament Center
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The filament center acts like a mini spool for loose filament and allows for easy swapping of the master spool for…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
The filament center acts like a mini spool for loose filament and allows for easy swapping of the master spool for Sunlu filaments found on amazon.
The inner slots allow for straps to be placed around the complete assembly or just the filament while installed on the master spool. The center can be removed from a spool by passing straps through the slots in the center and just around the filament. Be careful removing the center halves because they are very thin.
Why I designed this is because if you over dry like the attached image of the green filament or the filament center gets loose it is a chore to install it onto a master spool. With these "mini spools" swapping out the master spool is a breeze.
Note: Do not use the "mini spool" by its self unless the outer diameter of the filament is bellow the rim of the "mini spool" otherwise you will have a mess!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
100
Filament: Sunlu PLA Any
Notes:
At my slicer settings it takes approximately 3.5 hours to print. YMMV!
Category: 3D Printer Accessories