1 / 4
Mercedes W203 SRS Rear Cover V2 — zdjęcie 1
1 / 4

Mercedes W203 SRS Rear Cover V2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a model of the SRS rear cover for a W203 Sedan. It could work with the other models.

Ocena
0 / 5
Polubienia
12
Pobrania
189
Wydruki
0
Wyświetlenia
784
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

This is… the rear SRS cover for the W203 Sedan!

This model is the remaster of the design created by me, based on the original Mercedes part! Although this was created with a sedan part, it could work on the Station or the Coupe.

This piece was modeled after the rear left cover. Even though the parts seem the same, there are slight changes. The original part numbers for this model are:

  • Right: A2036901630
  • Left: A2036901530

The original parts are made of ABS. However, I printed these out of PETG (I would check if it's safe for your region).

Also, I tried to replicate the original "SRS AIRBAG" font. If you can identify the original font, I will update the model, to be 100% correct. And, of course, if there is something that can be improved, I'll be more than happy to hear the feedback!

 

Description for the V2: The roof holder part was changed. Now, it's required to be glued in on the recess on the main part. The build of materials are:

  • 1x Mercedes W203 SRS Rear Cover (Sedan) - Left_V2.STL
  • 1x Mercedes W203 SRS Rear Cover (Sedan) - Right_V2.STL
  • 2x Mercedes W203 SRS Rear Cover (Sedan) - Holder.STL

The printing of the trim holder is not mandantory, and it’s only purpose if to stay attached to the rear headliner piece when this piece is removed. 

Tagi