Milwaukee M18 Battery Mounts All Purpose Tight lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A selection of different M18 clip-on mounts. Will fit most needs.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 100
- Wydruki
- 1
- Wyświetlenia
- 811
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Will securely hold your M18's wherever you need them most.
I've made four versions.
All of them will lock/clip the battery in place with the tabs.
All of them should be printed in the orientation illustrated below: (The tilted version might be challenging without supports) 
The normal:
-Plenty of clearance for fingers, when mounted flush against another mount.
-Allows a decent amount of visibility when mounted beneath a shelf.
-Leaves the option for adding something like a dymo-label, in a readable angle.
The Long:
-Plenty of clearance for fingers, when mounted flush against another mount.
-Can be mounted in corners, such as under a shelf, flush against a wall, and still leave room for the battery.
The Tilt:
-Plenty of clearance for fingers, when mounted flush against another mount.
-Makes it possible to mount closer to other mounts in a vertical arrangement.
The Slim: (Essentially just the the bottom off the normal)
-Really for whatever. Just wanted to leave it as an option.
-Saves about a centimeter in height, might need to be mounted against an outer edge, allowing for clearance to the tabs on the battery.