1 / 1
Filament Dryer Box with Tempeture Humidity Meter - REMIX
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
REMIX: Basic filament dry box with Temperature Humidity Meter
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 165
- Wydruki
- 2
- Wyświetlenia
- 1038
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (51)Powiązane
3D Printer
AnkerMake M5C with eSUN PLA+
Total of an 1hr 27min and 37g of filament with out supports
Parts to Print
- 4 x Container Roller - half (You may need to do a little sanding. I was able to gently hammer the bearings into place with no issues) - NO SUPPORT
- 1 X Container Base With Temperature Humidity Meter - SUPPORT REQUIRED
- Optional - 1 X Container Lid Pass through 60mm (or you can drill a hole through the lid for the fitting) - NO SUPPORT
Materials Needed
- 1 X Cereal Container:
https://www.amazon.com/gp/product/B08JQ9P5L6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
- 4 X Bearings:
https://www.amazon.com/gp/product/B07XLV1W2M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
- 1 X PC4-M10 Fitting Connector and 6" of PTFE Tubing (I bought the kit for other projects):
https://www.amazon.com/dp/B07PV8754Z?psc=1&ref=ppx_yo2ov_dt_b_product_details
- 1 X Temperature Humidity Meter:
https://www.amazon.com/dp/B0CN8RCHFT?psc=1&ref=ppx_yo2ov_dt_b_product_details