1 / 6
Metabo FMS 200 Intec - Vaccum adapter 35mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed an adapter to plug this sanding machine to my vaccum (35 mm). It was a little bit tricky to adjust it…
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 339
- Wydruki
- 6
- Wyświetlenia
- 1079
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 6) (Komentarze: 8)Remiksy (0)Kolekcje (33)Powiązane
I needed an adapter to plug this sanding machine to my vaccum (35 mm). It was a little bit tricky to adjust it perfectly. It fit just a little tight to the machine so it won't move when we use it.
It's not the best design i've ever made but it works !
I printed this in ABS but PLA+ or PETG should be fine.
It will need support but not everywhere (see cura screenshot).
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Yes
Supports:
Yes
0.2
Infill:
30%
Filament:
Geeteck ABS Black
Category: Machine Tools