Royal Enfield Himalayan 411 Air Filter Inlet Bell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Air Intake Bell for 411 Himalayan with OE and DNA air filters. Gives 'cleaner' airflow paths into the filter.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 277
- Wydruki
- 0
- Wyświetlenia
- 1608
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Owners of the wonderful Royal Enfield Himalayan 411cc adventure motorcycle often fit DNA (washable) air filters to their bikes.
One of the options from DNA Filters is a plain steel plate that holds the filter in place. In terms of ‘clean’ airflow paths into the filter - whilst it's an improvement on the original equipment, I thought I'd go one step further and create an inlet bell that simply sits atop the DNA plate to create better airflow paths into the filter.
Inlet pressure losses to the air filter will be significantly reduced with this addition. That being said, it probably won't make much difference in real-world performance - but since you already own a Himalayan, you obviously don't care about white-knuckle-jet-fighter performance from your steed. But when one is an engineer, one is an engineer (for life), and one likes things done ‘right’.
I printed mine from PETG because of the potential higher temperatures in the area - but, to be honest - PLA would probably suffice. It doesn't really get THAT hot at the air intake. The part itself doesn't carry much (any?) load (it's only smoothing out air), so you don't need to go overboard with perimeters and infill etc. Just use defaults in your slicer I reckon. I've had mine in for about 3,000km so far, including some pretty tough adventure riding, and it's as good as the day I printed it.
Update 5th March 2025
I was a bit bored yesterday and was fooling around with onshape. I added an updated version of the Inlet Bell. Same basic shape - just some extra ‘fillet’ material between the mounting tabs and the semi-torus shapes. I printed off another copy in ASA to see how it would print - and it was great. I used three perimeters and 20% Adaptive Cubic as infill. I also printed the top 2mm (from 14.2 to 16.2mm) at 0.1mm layer height rather than my standard 0.2mm for a smoother finish to the top of the torus.
Update 14th July 2026
I had a request from @MotoFan_5088191 to design an inlet bell for use with the OE Air Filter. He doesn't have a DNA filter or Filter Plate.
Included are the STEP, 3mf, and STL files for the OE Filter setup (Filter Holder, Sealing Ring, and Inlet Bell). The DNA inlet bell is not compatible with the OE setup as they have different outer diameters and throat sizes.
The parts all print in the orientation they open with. No support material required.
I'd suggest PETG or ASA with 20% cubic infill and 3 perimeters for the Filter Holder and the Inlet Bell.
The sealing ring must be printed from a flexible material such as TPU. I've designed it to be 2.5mm tall, but squishing down to 2.0mm once installed. If you find this is too firm (or loose) for your installation, you can reprint it and scale it in the Z direction (only) in your slicer. In any case, I'd advise using a sealing grease of some sort when installing it as you don't want any dusty air getting beyond this sealing ring.
I'd suggest gluing the Inlet Bell and the Filter holder together for extra stiffness/rigidity/strength. The glue doesn't need to be super strong, as the glued surface will always be in compression. It's not critical.
You may also need slightly longer M5 mounting bolts as the inlet bell plus filter holder is thicker that the OE injection moulded filter cover. I found that the original bolts only JUST engaged with their mounting nuts and was not at all secure. Get bolts that are at least 5mm longer than the originals.
Additional update 14 July 2026
I made a few very minor tweaks to the DNA Filter Inlet Bell. Just smoothing out sharp corners etc. Nothing dramatic. STEP, 3mf and STL files included. If you've already printed this model, don't bother reprinting this update. It's just for new prints.