Thurstmaster warthog Joystick mount for 45x45 - 90x45
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for your thurstmaster warthog joystick on you 45x45 simrig. For the vertical version, the axes must have been…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 1265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
Mount for your thurstmaster warthog joystick on you 45x45 simrig.
For the vertical version, the axes must have been threaded as shown on the picture. Then you put the mount with srews. I added a cover so the joystick's electronic won't be touched by any screws.
You need the 4 screws from the orginal plate to set the joystick to the mount.
I'm using the 90x45 version but there are 2 other versions (i have no use) for 45x45 profile.
It do not move when you're playing... I'm preparing the same sort of thing for the warthog throttle.
Enjoy :)
Print Settings
Printer Brand:
Creality
Printer:
CR-10
No
Supports:
Yes
0.2
Infill:
20%
Filament:
Sunlu PLA+
Notes:
I'm using brim and Silc3r (best slicer ever ^^)
Category: DIY