AMS/MMU Pokémon Displays : Starters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small. Cheap. Simple(Mostly) Small Pokémon Stands Designed for MMU/AMS Systems
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Small. Cheap. Simple(Mostly)
Small Pokémon Stands Designed for MMU/AMS Systems, Files included are the base 3 starters, and Pikachu, Each have their own respective Painted, and Standard file for your use.
Fast Printing at only a couple hours, And cheap at less the 100G, split up between many filaments.
Tip: When printing any model other then Pikachu, with either one AMS or a MMU, in order to get all the colors in one print,(Charmander is 6/7), I recommend(at least on Bambu slicer) Set Multiple filaments to the same mapping, so have two in AMS 1, 2 In AMS 2, etc. then watch the first 3-4 layers, when you see the filament in AMS 1 complete its pass, and the printhead docks to change, pause the print change the filament in the AMS slot and proceed. Reminder the more bottom layers , the better the final product, but also the more hassle and filament changing.
Recommended settings:
Layer Height - Doesn't really Matter
Infill - 10% - Use isotropic infill such as gyroid.
Perimeters - 3
Bottom Layers - 4, The more the better.
I heavily recommend using Arachne over classic in Bambu's case.
License: I do not condone the act of selling my models online or in shows. When i get the quality up, and have tested my models i will release a patron/commercial use license for the public, but as of right now these remain my models in my domain.