1 / 6
CYD (cheap yellow display) generic enclosure mount for the Neptune 4
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts for the CYD enclosure for the Neptune 4/Pro.
- Ocena
- 4 / 5
- Polubienia
- 12
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 1282
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (18)Powiązane
TeachingTech did a video on the CYD (cheap yellow display) as an input device for klipperized printers. He also created a generic enclosure for the display. Use these mounts to attach it to Neptune 4/Pro printers.
Why?
The original firmware of the Neptune 4 is crap (your mileage my vary). Therefore the OpenNept4une project has been created, so you can install Klipper on the machine. After the upgrade, the original display is no longer working. This is where TeachingTech's video came into play.
Bill of materials:
- 2x M4x10 screws and nuts
- 7x M3x12 screws
- 3x M3 nuts
- 3x M3 Sliding T-Nuts.
Assembly:
- Print the T-Nuts (don't forget the to pause the print to insert the M3 nuts like I did).
- Loosen the 2 screws that fix the front panel to the printer so you can slide the T-Nuts into the extrusion (see pictures for reference). The front cover can be bent back far enough without damaging it, so that the T-nuts can be inserted.
- Attach the base plate to the holder with the M4 screws.
- Assemble base, display, and front cover and screw the plate to the front cover with the M3 screws. The screws will self tap.
- Attach the mount to the T-Nuts using M3 screws.
Printing:
- Generic PLA, 20% infill, no supports.