XY-SK80H Buck Boost Converter Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for a XY-SK80H Buck Boost Converter. It fits many different models having this form factor (39mm x 71.3 m
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 134
- Wydruki
- 1
- Wyświetlenia
- 702
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case for a XY-SK80H Buck Boost Converter. It fits many different
models having this form factor (39mm x 71.3 mm). You'll need the following to
assemble it:
* 4 M3 x 5 mm brass insert or glue
* 4 M3 x 8 mm screws or glue
* 4 ferrules (optional)
* 1 KCD1-101 switch
* 2 black binding posts (mounting diameter of 8 mm)
* 2 red binding posts (mounting diameter of 8 mm)
* Some wire
* Soldering related tools
Support material is not required for the main body. Support material that
touch the build plate is required for the bottom cover. An infill of 25% is
recommended.
This object main web page is:
http://www.ctheroux.com/xy-sk80h-buck-boost-converter-case/.
This object was designed using Solid Edge Community Edition.
You can request the source files on the page listed above.