HEMA 25cm Training Buckler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Buckler to train with sidesword in the Bolognese fencing school.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 150
- Wydruki
- 0
- Wyświetlenia
- 614
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
⚠WARNINGS ⚠ THIS IS NOT A CERTIFIED HEMA SPARRING BUCKLER.
IT IS TO BE USED AS A RIGID PROP TO STUDY FORMS BY YOURSELF ALONE NOT AGAINST AN OPPONENT!
I AM NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY IF USED AGAINST AN OPPONENT!
Hello,
I needed a buckler to practice the first form of Achille Marrozzo with sidesword and I have a 3d printer so……
Is been printed on my Quidi X-Plus 3 but you can probably scale down for a 220 cube printer (not sure the screws will fit probably you need to use smaller ones)
This one is been printed at 0.25 layer height in PETG (if you print at smaller layer height you will improve the finish but I didn't care)with 50% gyroid infill for the buckler and 25% 3d cubic infill for the handle
BOM:
2x M6x20 button heads
2x M6 washers
2x M6 nuts
Enjoy!