Sedus Black Dot 102 - Slipping Armrest Repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had a slipping armrest on my Sedus Black Dot (BD-102) Office Chair. The problem was a worn out part that holds the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had a slipping armrest on my Sedus Black Dot (BD-102) Office Chair.
The problem was a worn out part that holds the whole armrest in place.
As there is no online shop or replacement part for sale (only the whole armrest), I took the measurements of the faulty part and modelled it in Fusion360.
The replacement part is for the left armrest, but if you mirror it, it should also be suitable for the right side.
Printed the part in PLA, for now it works great!
I will update you guys on how long it will last. :P
But I think its best if you print it in something stronger like ABS.
Enjoy your repaired armrest.
Greetings Malwin.
Print Settings
Printer:
CR-10 Modified with Duet
Rafts:
No
Supports:
Yes
Resolution:
0,2
Infill:
50
Filament:
- PLA or Stronger
Notes:
Printed with 3 Outlines, 50% Infill and 4 Top / Bottom Layers with Skirt only.
Category: Replacement Parts