AFA Countersink & Deburr Pegboard Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pegboard tool holder for the AFA countersink and deburring set!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this pegboard mount for the AFA Tooling deburr tool & two countersink tool set from Amazon, to keep them off the bench and stored when not being used for print post processing! The pegboard holder is sized to mount using 6mm automotive push rivets (example and what I used), and will work for ¼" or 6mm hole size pegboard.
Rivets may need to be screwed in to fully seat depending on your pegboard, mine were a touch snug but screwed in fully without issue.
Models are available in a recessed text version for single filament printers and a multi-material .3mf file for multiple material printers to have more readable text!
Print Settings
Printed with PLA using organic supports and .1 detachable layer height for the interface layer on a Prusa XL. Supports will likely be needed for almost all printers.
Updates
22OCT2024 - Adjusted back wall thickness to 3mm for easier insertion of automotive rivet pin.