Hot Wheels Track Clamp Separate Track Adapters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hot wheel clamp remix with track adapters as separate pieces so you can have stronger layer alignment.
- Ocena
- 5 / 5
- Polubienia
- 159
- Pobrania
- 1214
- Wydruki
- 5
- Wyświetlenia
- 3852
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Background
I set out to make this remix because all the other track clamps I printed and used would break at the same spot along the layer lines on the sides of the square pieces that interface with the tracks (see picture below).
This led me to split the original model into just the clamp with large surfaces and then provide the squares as separate objects so they can printed on their face for optimal strength. They can then be super glued or 3d Glooped onto the clamp in whatever location and quantity you desire.
Printing
All parts should be printed as oriented in the files. One track interface square is provided but you can simply print as many copies as you need. No supports are needed anywhere.
Assembly & Usage
I used super glue to apply the track interface squares to the side of my clamp and they've been going strong for months of abuse from my kids. The tracks will slide onto the squares from either direction also.