1 / 3
Resin Printer Heater / Chauffage d'imprimante à résine — zdjęcie 1
1 / 3

Resin Printer Heater / Chauffage d'imprimante à résine

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Printer Heater Controller in open space and much easier for cabling / Chauffage facile pour imprimante à résine moyenne

Ocena
0 / 5
Polubienia
4
Pobrania
21
Wydruki
0
Wyświetlenia
286
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a case to house a W1209WK temperature controller and a 12V AC 100W heater and fan to maintain the ideal temperature for a resin printer.

You can easily find the controller, heater and fan on the Internet. For the power supply, I use a 110/220V AC 12V DC transformer with cigarette-lighter connection.

Here are a few links
https://fr.aliexpress.com/item/1005005611120121.html
https://fr.aliexpress.com/item/1005003656112878.html
https://fr.aliexpress.com/item/1005005649440100.html

You'll also need m5 screws and a tap to secure the case. You can also use m4 screws with nuts.

Print in PETG with a few holders. The template will help you to drill the cover of your printer with a 6 mm wood bit for the 4 corners and 7 mm for the central passage of the electrical cable.

Don't hesitate to ask me questions, I usually reply within the day.

Happy resin printing!

--------------------------------------------------------------------------------------------

Il s'agit d'un boitier pour abriter un controleur de température W1209WK  et un chauffage 12V AC 100W et ventilateur pour maintenir la température idéale pour une imprimante à résine.

Vous trouverez facilement le contrôleur et son branchement ainsi que le l'élément chauffant et le ventilateur sur internet. Pour l'alimentation, j'utilise un transformateur 110/220V AC 12V DC avec connexion allume-cigare.

Voici quelques liens
https://fr.aliexpress.com/item/1005005611120121.html
https://fr.aliexpress.com/item/1005003656112878.html
https://fr.aliexpress.com/item/1005005649440100.html

Vous aurez également besoin de vis m5 et d'un taraud pour fixer le boitier. Vous pouvez également utiliser des vis m4 avec écrous.

Imprimez en PETG avec quelques supports. Le template vous aidera à percer le capot de votre imprimante avec une mèche à bois de 6 mm pour les 4 coins et 7 mm pour le passage central du cable électrique.

N'hésitez pas à me poser des questions, je réponds généralement dans la journée.

Joyeuses impressions résine!

Tagi