Photogenic StudioMax Monolight 7" Parabolic Reflector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"$60 each!? I can 3D print that instead!" -Famous Last Words
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I didn't feel like paying $180 for a set of new reflectors and I've been trying to figure out how to print ASA properly. This project just fit my needs like a glove!
Designed in FreeCAD, these 7" parabolic reflectors fit a Photogenic StudioMax III monolight. I don't have a StudioMax II to test, so only saying it'll work with the III version.
Recommend printing from a high-temperature material; I am using ASA. Should fit on a standard MKIII, Ender, or Bambulabs bed. After printing, either paint the inside of the reflector white/silver or glue aluminum foil to the inside of the parabola. I went the “paint it” route because I'm lazy. Gonna find out how long this holds up.
I have also included the FreeCAD files if you want to mess around and make something new to share!