Seadoo Speedster 150 mirror holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi... Since my mirror holder broke off on the last ride with my Seadoo Speedster 150, I decided to print a new one.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 592
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Hi...
Since my mirror holder broke off on the last ride with my Seadoo Speedster 150, I decided to print a new one. It is attached to the waketower with 4x M6x35 Allen screws. The Waketow bar has a diameter of 47.6mm and the arm for the mirror is approx. 330mm long.
Print Preview:
Support material:
the support material is contained in the arm and not in the clamp.
With the head, on the other hand, support material prevents falling over
You need:
- Printed parts ;-)
- 1x Screw 3,5 x50
- Mirror from amazon: https://www.amazon.de/gp/product/B018GGK2AC/ref=oh\_aui\_detailpage\_o05\_s00?ie=UTF8&psc=1
- 4x M6x35/40mm
Happy printing
MFG
Chris
Follow me on...
prusaprinters.org
thingiverse
Instagram
If you like it ;) - Thx for me!
www.paypal.me/schiffersoft
Print instructions
I ground the parts with grain size 180 and then with grain size 320. The dust is well blown off and then primed with RAL 9010. Then re-sanded with 320 and varnished again with RAL 9010 and after drying the final coat again with clear varnish.