Alternate AnkerMake M5C Filament Guide (Remix - Horizontal mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A filament guide that is made for the Ankermake M5C. Positioned on the top gantry bar to route filament horizontally.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 234
- Wydruki
- 2
- Wyświetlenia
- 1135
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Having my M5C in an enclosure, where the enclosure sits on its side, I didn't have enough room to run the OEM spool-holder arm in the original upright/vertical position, as it was too high. So I installed the arm horizontally which works well, however, due to the Bowden-tube guide topper attachment, only working in the vertical position, I can't use it as it would just fall off and the hole would be incorrectly oriented in the vertical position.
Seeing @just_trey's Alternate AnkerMake M5C Filament Guide version, which I really like, I remixed it slightly to allow the filament to insert from the right side of the printer, as it did with the original guide. I chopped it up and reoriented the arm to allow the filament to come in horizontally, keeping my height within clearance of the enclosure ceiling.
Common Parameters
| Total Print Time | Number of Print Files | Layer Height | Nozzle Diameter | Material |
| 1 hr 1 m | 1x print file | 0.2 mm | 0.40 mm | PLA+ |
Weight / Printer Make & Model / Temps
| Total Weight | Printer | Bed Temp | First Layer Temp | Other Layers Temp |
| 17g | Ankermake M5C | 60° C | 215° C | 215° C |
Infill / Skirt / Brim / Support
| Infill Density | Infill Pattern | Skirt | Brim Width | Support Material |
| 15% | Grid | 2 Loops | 3 mm | Yes (Organic; Tree) |
Speeds (mm/s or %)
| Perimeter Speed | Infill Speed | Small Perimeters | External Perimeters | Non-print Travel |
| 250 | 250 | 40% | 50% | 300 |
Remix of: @just_trey's Alternate AnkerMake M5C Filament Guide