1 / 3
Marble Maze
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully 3D printable marble maze (marble not printable). Design allows for exchangeable boards.
- Ocena
- 1 / 5
- Polubienia
- 43
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 1292
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (15)Wydruki i komentarze (Wydruki: 0) (Komentarze: 7)Remiksy (0)Kolekcje (62)Powiązane
Marble maze based of the Brio wooden marble mazes. Designed to allow for customizable boards (192.8mm x 152.8mm). The current board is a 6/10 in difficulty. At some point I want to make easier and harder puzzles.
Files To Print (3MF or STL)
3MF
- Frame-Board-1
- Frames-Small Parts-2
- Board Wall - 3
STL
- Board
- Board Walls
- Frame Link Cover (x2)
- Frame Pin Cover (x4)
- Frame
- Frame Pin (x4)
- Game Holder
- Inner Frame
- Knob (x2)
- Link(x2)
- Player Pin Cover (x2, One mirrored in Y)
- Player Pin (x2)
Directions
- Take the Game Holder and Inner Frame and align the holes and insert a Frame Pin into both sides. Cover the Frame Pin with Frame Pin Cover. The Game Holder should spin freely when finished.
- Take assembly from step 1 and insert into Frame. Add the remaining two Frame Pin into the holes and cover with the Frame Pin Cover.
- Insert the two Links into the Game Holder piece of the assembly. Cover the Link with the Frame Link Cover.
- Slide in the Player Pin on the two sides with the longer arm towards the Links
- Line up the Links and the two Player Pin Covers and then push into place
- Hold the Player Pin in place while pushing the Knob into position
- Take the Board and Board Walls and snap into place
- Snap the Board into the Game Holder