RadioMaster Gimbal Stick Ends Set [New Updates]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ergonomic design approach made for hybrid pincher by hybrid pincher!
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 679
- Wydruki
- 2
- Wyświetlenia
- 2912
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
RadioMaster Gimbal Stick Ends Set
Unless specified and/or for heat set inserts, all stick ends are designed for flexible materials. i.e. TPU, TPE, etc.
In case you need some clarification:
M3:
Radiomaster
- Pocket, Zorro, TX12
Jumper
- T20, T-Pro, T-Lite
M4:
- Boxer, TX15, TX16S
NEW: AG01 and brass inserts compatible models
NOTE: If you're using Radiomaster Pocket or other screw-in type stick ends, you will need a headless threaded screw (see image below).
Features:
- Super comfy thumber stick end - Say goodbye to dented thumbs with these grippy and wide stick ends
- Hybrid pincher's good news - a unique and ergonomic design for hybrid pincher (thumb on top with index finger wrapped around the stick)
- Perfect fit, no more post-processing - filleted hole for easier threading on the M3 (ø2.5mm) stick screw
- Hate it? Flip it! - V2 is designed for hybrid pinching, flipping it upside down can give a better-angled grip for the thumb
- Alien? - This set featured a concept design for traditional pinchers with an extremely wide profile.
Updates/Changelog:
- [13/04/2024] M3 set model files added - check the filenames
- [12/09/2024]
- Old models moved to the “Legacy” folder
- Introduced V5 and V6 for Pinchers and Hybrid Pinchers
- Name Change: V1 (Legacy) → V1T; V1T(Legacy) → V1P
- Increased length and improved geometry on V1P (Legacy V1T)
- [30/10/2024]
- Added:
- V7 - Crow; and V8 - Durian
- Added:
- [16/05/2025]
- Added:
- V12 - Hybrid King
- Added:
- [03/10/2025]
- Added/Updated:
- V6 and V9 - all 3 variants
- Added/Updated:
- [21/10/2025]
- Added/Updated:
- V10 and V12Flex - all 3 variants
- Added/Updated:
Print Settings
- Printer: Creality Ender 3
- Filament material: TPU
- Layer height: Default or finer
- Wall Ordering: Outside to Inside
- Supports: Optional
- Infill: 10-20% (for softer/flexible feel) | 60-80% (for firm/stiff feel)
- Infill Pattern: Hexagonal/Tri-Hexagonal
- Nozzle Temp: 230°C
- Bed Temp: 60°C
- Print Speed: 80mm/s
- Rafts: Doesn't Matter
- Notes: Please read the version for the corresponding designs!
V1T - The Thumber
V1P - The Cactus [Updated]
V2 - The Hybrid Pincher [Legacy]
V2W - The Wide Hybrid [Legacy]
V3 - ALIEN! (just kidding, it's an unfinished concept)
V5 - The Finger [new]
V6 - The Fat Pincher [experimental]
V7 - Crow
V8 - Durian
V12 - Hybrid King