Lilygo T5 4.7 Inch Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a case designed for the Lilygo T5 Plus 4.7 inch display based on ESP32-S3 module.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 156
- Wydruki
- 1
- Wyświetlenia
- 1813
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a case designed specifically for Lilygo T5 Plus ePaper display which is based on esp32-s3 module.
This project was created to be used as an informer connected to Home Assistant via the power of ESPHome and siplay some useful information for me like weather forecast, tasks, temperature in house, etc.
The project can be found here.
I printed it in PLA and there is no need for any support.
If there is something that you don't like about this project and would like to improve it, please be my guest and use this link to copy the onshape project and modify it.