Anycubic Kobra / Kobra 2 / Kobra 2 Pro - Toolbox 07
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anycubic Kobra / Kobra 2 / Kobra 2 Pro - Toolbox 07 - Toolbox with two drawer and top Short version of Toolbox 06.
- Ocena
- 4,5 / 5
- Polubienia
- 111
- Pobrania
- 758
- Wydruki
- 2
- Wyświetlenia
- 3428
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Anycubic Kobra / Kobra 2 / Kobra 2 Pro - Toolbox 07
The toolbox 07 is the smaller version of the toolbox 06.
Toolbox with two drawer and top .
The drawers has indexing in the closed and open position.
To install this toolbox on your 3D printer, it is not necessary to remove something from the printer.
Simply place on the upper channel of the printer profile, and pressed until it clicks.
Before printing this toolbox, I recommend you do a test print, regarding the offset between 2 pieces. Please analyze the dimensions between the compartment where the drawer fits and the drawer (see picture)
Printing parameters for both :
Layer height : 0.2
Perimeters : 3
Solid layers : 4
Infill : 15%
Support : YES - only for main body
Brim : Outer brim only 10 mm
Material : PLA
Printer : Anycubic Kobra 2 Pro
You can check my other toolboxes :
https://www.printables.com/model/707806-anycubic-kobra-kobra-2-kobra-2-pro-toolbox
https://www.printables.com/model/729540-anycubic-kobra-kobra-2-kobra-2-pro-toolbox-02
https://www.printables.com/model/733765-anycubic-kobra-kobra-2-kobra-2-pro-toolbox-03
https://www.printables.com/model/736226-anycubic-kobra-kobra-2-kobra-2-pro-toolbox-04
https://www.printables.com/model/736606-anycubic-kobra-kobra-2-kobra-2-pro-toolbox-05
https://www.printables.com/model/737756-anycubic-kobra-kobra-2-kobra-2-pro-toolbox-06
If you print this accesories please share your make, leave a review, and drop a like.